New to sourdough baking? I highly recommend reducing the hydration in this recipe if you are new to sourdough baking. This is a high hydration dough and can be challenging to work with (and build strength in) if you're not an experienced baker. If you're looking for an easier to handle dough, I recommend reducing the water to 310 to 330 grams total. If you're working with a lower hydration, you may be able to get away with just 3 to 4 sets of stretch and folds, or even less. Follow the dough's lead!
IMPORTANT NOTE: I do not prepare an off-shoot levain for my sourdough baking, as this baking timeline and method works well for my schedule, as well as my starter's feeding schedule. This choice is up to you and can be adapted/tweaked to fix your schedule, but please plan accordingly. Keep in mind that you'll need to account for the starter quantity in the recipe (90 grams), as well as the normal quantity needed to continue to maintain and feed your starter.
Autolyse: In a large mixing bowl, whisk together 350 grams unbleached bread flour and 90 grams whole wheat flour. Add 350 grams (90°F/32°C) filtered water and mix with your hands until thoroughly combined and no dry bits are visible. Cover with a clean shower cap or plastic wrap, and rest at 80°F/26°C for 1 hour or up to 2 hours. This step hydrates the flours and helps build dough structure.
Add Starter and Rest: While this test isn't fool-proof, your sourdough starter should pass the 'float test' when it's ready. Place a tiny spoonful of your ripe starter in a jar of water, it should float to the top. If it sinks, give it more time (15 to 20 minutes) and test again. Add 90 grams ripe sourdough starter and spread it over the autolyse mixture. Use your fingertips to spread the starter over the autolyse mixture. Fold the edges of the dough into the center to fully incorporate the starter. Use your thumb and fingers to pinch the dough (pincer method) repeatedly until the starter is well incorporated. Don’t be delicate. You want to work quickly, but fully incorporate the mixture. Cover and rest at 80°F/26°C for 30 minutes.
Add Salt and Rest: Sprinkle 9 grams salt over the surface of the dough. Use your thumb and fingers to pinch and incorporate the salt thoroughly (you shouldn't feel any granules at the end of mixing) into the dough. Depending on the coarseness of your salt, this might take a couple minutes. Be thorough. Cover and rest at 80°F/26°C for 15 minutes. Important Note and Tip: If you’re struggling with higher hydration doughs and dough strength, there are two additional mixing methods that you can try: slap and fold or the Rubaud method. Please see the full video included in this post for visual demonstration.
Bulk Fermentation: We will preform a total of 6 sets of stretch and folds (see article above for further instruction) in the first two hours of bulk fermentation. The first three will take place in 15-minute intervals. The remaining three will occur in 30-minute intervals. Covering and rest the dough at 80°F/26°C between each set. The dough will not rise much during the stretch and fold period, but it should get considerably stronger. Dip your hands in water (to prevent sticking) before each fold. I like to rub my hands together to avoid incorporating much more water, as this is already a high hydration dough.
How to Preform a Stretch and Fold: Grab the top portion of the dough with both hands. Gently pull and stretch it upwards (without tearing) and fold over the opposite edge. Rotate the bowl 180 degrees and repeat from the other side. Rotate the bowl 90 degrees and repeat once again on both sides. This entire process is one stretch and fold set. After performing the stretch and folds, I like to gently lift the dough to round it nicely in the bowl (see video). *If your dough is developing quickly, you can reduce the total number of stretch and folds to 3 or 4 sets, 30 minutes apart.
Bulk Fermentation (continued):Allow the dough to rest, covered at 80°F/26°C, for an additional 1.5 - 2 hours after the last stretch and fold - watch it carefully. Generally, I like to end bulk fermentation when the dough is just under double in size. This has produced good results for me and this guideline works well for this specific sourdough process and timeline.The total bulk fermentation time will vary tremendously based on your ambient kitchen temperature, dough temperature (FDT), flour type, and several other factors, so watch it carefully.Judging the right point to end bulk fermentation and move to the pre-shape period requires practice and trial-and-error.
At the end of bulk fermentation, the dough should be well aerated and there will be many gas bubbles on surface, as well as on the edges of the bowl (see video). The dough should be slightly rounded on the edges of the bowl. If the dough is flat, you most likely didn’t build enough strength during mixing, stretch and folds, or bulk.
Pre-Shape: Transfer the dough, without degassing, onto a clean countertop. It will be sticky. Use a bench knife to gently shape the dough into a round, pulling it gently towards you on the countertop in a circle to create some tension on the skin of the dough. As you do this, you’ll notice that the dough comes into a shape and starts to feel bouncy (see video). The key is to do this as quickly and gently as possible. Rest the dough, uncovered, for 15 to 20 minutes, or until it has relaxed slightly for the final shaping. Pre-shaping gives the dough some extra tension and strength (and is particularly important if you are doubling the recipe and preparing two loaves, as you'll need to divide it prior). Allowing it to rest allows the gluten to relax slightly before preforming the final shape.
Final Shape:Dust a 9-inch round or 10 or 11-inch oval banneton basket with rice flour (be extra liberal if you are not using a cloth or linen liner).Dust the surface of the dough lightly with bread flour. Use a bench knife to gently lift and flip it flour side down onto your countertop. Depending on your preference, banneton, or baking vessel, shape the dough into a round or batard.*Tip:Pleasewatch the videoabove for visuals on how to shape a batard (oval loaf) or my latest video onhow to shape rounds (boules) and bake in a Dutch oven. After shaping, gently pick up the shaped dough, flip, and transfer into your floured banneton, with the seam side facing up. Drape a kitchen linen over the banneton and place the banneton in a plastic bag (*I use a clean plastic produce bag). Seal with a clip and allow the dough to rest at room temperature for 10 minutes.
Final Proof: Place covered banneton basket in the refrigerator and retard dough for 15-16 hours at 38°F/3°C. This slow and cold fermentation stage helps develop flavor and improves the final crust texture.
Preheat the Oven: Preheat your Challenger Pan, Dutch Oven, or combo cooker (with lid on) in a 500°F/260°C oven for at least 1 hour.
Poke Test for Proofing: Once the oven and baking vessel have preheated for an hour, remove the banneton from the fridge and uncover. Test the dough for proper proofing by lightly flouring one small section (while the dough is still in the banneton). Press your finger lightly into the dough. A properly proofed dough should very SLOWLY spring back and still leave a light indentation. That is a sign of a well proofed dough that is ready to be baked. If it springs back quickly and completely, it is under-proofed (return to the fridge, covered, for an additional hour or so). If the dough compresses and doesn’t spring back at all, it is over-proofed. Unfortunately at that point, it’s hard to make up for in that stage of the process - but it will still taste delicious!
Transfer and Bake: If you are using a Challenger Pan or combo cooker, you can skip parchment and carefully invert the basket directly into the preheated base before scoring. If you are using a traditional Dutch oven, please watchthis video for visuals:Place a large piece of parchment over the banneton, then top with a thin cutting board. Invert and flip carefully, so that the banneton is upside down, setting it down onto your countertop. The dough should release, right side up, from the banneton onto the parchment. Trim any excess parchment paper, creating two handles on both ends for lifting the dough. Use a bread lame toscore the dough(1/2-inch deep), carefully transfer into the preheated pan, cover tightly with the lid, and place in the oven. Bake covered at 500°F/260°C for 25 minutes.
Remove the lid. The dough should have risen and expanded considerably, and the crust should be set, but only lightly golden in color.
Reduce the oven temperature to 475°F/240°C (*note: if your oven runs hot or your loaves are browning too quickly, reduce the temperature to 450°F/232°C) and continue to bake uncovered for an additional 15-25 minutes or longer until the crust is deep golden and caramelized. I like to rotate the pan several times during this final stage to ensure even browning.
Carefully remove the bread from the pan and transfer to a cooling rack. Coolcompletely before slicing. This will take several hours. Slicing into warm bread will result in a gummier texture and cause the bread to stale faster. For more tips, read this guide onhow to store, freeze, and refresh sourdough.
FAQs
What is the difference between sourdough and artisan sourdough bread? ›
The difference between sourdough artisan bread and artisan bread is the fermentation process. Sourdough requires the starter which takes 5+ days to craft. On the other hand, artisan bread can be whipped up within a day using bread flour and instant yeast.
What is the secret to good sourdough bread? ›- Use your sourdough starter at its peak. ...
- Moisten the surface of the dough before baking for more rise. ...
- Handle with care: be gentle with your dough. ...
- Use sifted flour to make your sourdough less dense. ...
- Soak your flour beforehand for a lighter loaf. ...
- Just add water for softer sourdough.
The magic that makes this sourdough so fluffy is a quick oven-rising process under very high heat. The key is to make sure the Dutch oven is fully preheated before baking the bread.
Is artisan bread healthier than regular bread? ›Artisan bread is thought to be a healthier option than store-bought bread. While there haven't been clinical studies to clearly define the differences, artisan bread is made from wholesome fresh ingredients whereas store-bought bread contains processed ingredients and preservatives to stretch the shelf life.
What flour makes sourdough more sour? ›For more tang: Incorporate some rye flour and/or whole wheat flour early in the bread-making process, such as when feeding the mother culture and the preferment. Rye flour in particular will help your culture produce some acetic acid.
What oil is best for baking sourdough bread? ›Yes - adding olive oil to sourdough bread will result in a softer crust and crumb. The oil as a lipid coats the flour and inhibits the gluten network resulting in a softer, tighter crumb and softer crust.
What is the healthiest flour for sourdough? ›Compared to whole wheat flour, rye flour is said to be the most nutrient- and amylase-dense option for a sourdough starter. Overall, it has a lower gluten protein content than wheat flour, which means it produces slack, sticky, and dense doughs.
What does baking soda do to sourdough? ›Baking soda or bicarbonate of soda can be used in sourdough bread to create a less sour loaf. Added after bulk fermentation, but before shaping, it can help to create a lighter, more fluffy loaf of sourdough.
Why do you put honey in sourdough bread? ›- With its characteristic tanginess and open crumb structure, Sourdough bread owes its magic to wild yeast and lactic acid bacteria. ...
- Adding honey to your sourdough starter enhances its flavour profile and infuses it with antioxidants, enzymes, and trace elements.
Longer fermentation
As your dough proofs, the good bacteria eats up sugars and starches in the flour. This decreases the sweet undertone and creates a more sour undertone. The longer you ferment, the more starches and sugars the bacteria eats, and the more sour your bread will be.
Why is my sourdough bread so dense and heavy? ›
One of the most common mistakes is having a dough temperature that's too low for the starter to feed on all the flour in the dough, resulting in a crumb that's dense, with fewer openings. "Starter is happiest and most active at around 75 degrees. If it's a lot colder, the process will be much slower.
What does perfect sourdough look like? ›The outer crust of your sourdough bread should be crispy, crackly, and have a glossy, caramelized brown finish. The key to achieving a healthy crust is getting sufficient steam while baking, as it keeps the outer crust moist while the inside cooks.
What does overproofed sourdough bread look like? ›Note: As loaves begin to overproof they lose their height and shape. The crumb becomes more dense. The holes become more ragged and irregular in shape. The crust begins to thin and separate from the crumb.
Which is better artisan bread or sourdough bread? ›Health benefits: Artisan bread may also be better for your gut - especially sourdough. Longer fermentation allows the enzymes in bread to begin to break down gluten, which is not easily digestible for most people.
Is artesano bread the same as sourdough? ›Artisanal is just a marketing term. Any kind of bread that is baked in a way that mimics small batch baking instead of factory style baking methods is likely to be called artisanal. Sourdough is actually a fermentation process that employs both bacteria and yeast.
Is artisan sourdough bread healthy? ›According to some studies, sourdough bread acts as a prebiotic, which means that the fiber in the bread helps feed the “good” bacteria in your intestines. These bacteria are important for maintaining a stable, healthy digestive system. Sourdough is also lower in gluten than other forms of bread.
What makes artisan bread different? ›The main differences between a loaf of artisan bread and regularly manufactured bread are the ingredients and methods used to create the bread. Artisan bread uses cleaner, less processed ingredients and is often handmade, making each loaf unique.